
Candle Packaging · Lid-Only Orders
Candle Jar Lids Wholesale
Source wholesale candle jar lids for a new range or a replacement order. Start with the jar you need to cover and choose the lid material, finish and fitted parts.
Send a finished jar sample or a rim drawing. Approve the lid on the actual opening before ordering a production quantity.
Compare Metal, Wood and Glass Candle Jar Lids
Compare the GLM042 tinplate family with silicone gaskets, the white metal GLM80, the black wooden GLW004 with silicone ring and the HC100 borosilicate bead-handle lids. The product grid shows closure references. Where a jar is pictured, confirm the parts you want quoted separately.
Request a Lid Match or Wholesale Quote
Send your jar model, rim drawing or sample, lid preference and quantity. Identify any ring or liner you need.
How to Specify a Lid for an Existing Jar
Use the exact jar, lid and fitted parts to prepare the request. Confirm where each measurement is taken on the finished components.

Send the Jar Rim and Seat
Show the opening and the surface the lid will touch. Include the inside opening and rim outside diameter where relevant, plus a drawing or a physical jar.
Review the Rim Brief →
Compare Metal Lid References
GLM042 lists eight catalogue references from 78 to 113 mm. GLM80 lists an 80 mm white metal version. Confirm the measuring point behind each reference and try the lid on your jar.
Review Lid Measurements →
Check the Gasket or Ring
Check the location and profile of the silicone gasket or ring where used. Review the actual lid and jar together with that part installed.
Review the Fitted Parts →
Compare Wood and Glass Finishes
Compare the black stepped GLW004 wood lid and the HC100 bead-handle glass series against the jar design. Confirm the chosen material, finish and appearance on a physical sample.
Review Material and Finish →
Approve Fit After Decoration
Try the lid on the finished jar with any ring or liner fitted. Check the seated position and removal, especially where decoration reaches the contact area.
Review Assembly Approval →Send photos of both sides, the part code and a production jar for a replacement sample.
Specify the Replacement Order
Send the previous lid or approved reference with the matching jar. List the lid, gasket or ring, finish and quantities separately so the quote identifies the exact parts.
Review the Replacement Brief →Approve Lid Color and Logo on the Actual Component
Send the artwork at its intended size and show the top position. Review the visible face, edge and underside on the actual lid. Bright Glassware can coordinate the finish and marking review for the selected material.

Check the Lid Against the Finished Jar
The HC100 photo shows how a bead-handle lid looks on a reference jar. Use your actual jar to check the selected closure, and list any vessel you want quoted separately.
- Jar rim. Record the opening, rim shape and seating surface with the measuring points shown.
- Lid and fitted parts. Identify the lid reference, material and any silicone gasket, ring or liner.
- Handling. Check seating and removal on the finished jar and review any required sealing function separately.
- Appearance and packing. Approve the top artwork, visible finish and protection for the lid face, edge or handle.
Lid-Only Sample Approval Checklist
| Specification | What to Review | Approval Reference |
|---|---|---|
| Jar opening and seat | Identify the inner opening, outside rim and actual contact surface. | Drawing with measurement points or finished jar sample |
| Lid geometry | Check the lid shell, depth or lower profile against the intended seat. | Matched lid and jar sample |
| Gasket, ring or liner | Confirm the fitted part, material and quantity to be supplied. | Approved closure and component list |
| Finish and handling | Try opening and refitting the finished lid and review the marked surface. | Signed finish and fit sample |
| Packing | Check face separation, edge protection and handle clearance where needed. | Reviewed lid packing sample |
Quote the Lid and Its Fitted Parts
Send your jar or rim drawing, required lid material and finish, artwork, quantities and destination. List any gasket, ring or liner to include.
Request a Project Quote →Pack Loose Lids to Protect the Faces and Handles
Review a packing sample around the lid you plan to order. Specify whether rings or other parts ship fitted or separately.
Ask for the lid stack or separator layout before approving the outer carton.
Separate the Visible Faces
Keep finished faces apart and check how each material is supported. Review how lids will be handled at unpacking and assembly.
Show bead height and the support points on the packing sample.
Protect Edges and Bead Handles
Use the actual lid height and profile to set clearance. Leave room around any glass bead or projecting handle so it does not carry a packing load.
Ask for separate carton labels for different finish, ring or insert references.
Identify the Lid and Ring Version
Label each finish, lid reference and matching fitted part. Keep mixed finishes and replacement versions identifiable by carton or inner pack.
Specify loose lids, matched sets or both, with the quantity of each component.
Confirm Count and Packing Scope
Confirm lids per pack, any separately supplied rings or jars, and the delivery destination. Agree packing for the specific components on the quote.
Plan Your Packing & Delivery
Share your order quantity, destination and retail or export packing requirements.
Discuss Packing & Shipping →Check the Contact Surface on the Actual Jar
Measure the jar at the seat and record how the proposed lid locates on the rim. For a stepped lid, check the lower profile and ring as a pair. If the lid needs a sealing function, define it and request evidence for the exact finished assembly.
Compare Glass Lid Details and a Stepped Wood Lid
These closure references show appearance and component details. Confirm the lid, any fitted part and the intended jar for your order.

Review the Lid Beside the Reference Jar
The HC100 photo shows the glass lid beside a reference jar. Compare the actual rim and lid seat on the jar you intend to use.

Choose a Bead and Glass Tint
The bead-handle family shows clear and tinted glass examples. Review the bead and tint on the selected sample and confirm which parts are included.

Inspect the Stepped Lower Profile
The GLW004 photo shows the black top, stepped lower edge and light-colored ring. Check the ring profile and seating on the actual jar.
What to Send for a Lid-Only Quote
Provide the selected material, fit reference and quantities by finish. Sample timing, MOQ and lead time depend on the exact lid and parts in the request.
How Bright Glassware Supports Lid Orders
Start with the vessel you use and review the lid and any fitted parts on one brief.
Glass Packaging Since 2005
Bright Glassware has supplied glass packaging and related components since 2005. The current lid catalogue includes metal, wood and glass references.
Coordinated Lid Sourcing
We can coordinate sourcing for the selected closure and identify any gasket, ring or liner for the quote.
Jar and Lid Sample Review
We support sample review using the actual jar and lid. Bring an approved lid or a drawing for a replacement order.
Finish and Marking Review
We can review finish and artwork on the selected closure with the intended jar. Marking feasibility depends on the actual material and surface.
Protective Pack Coordination
We can coordinate a protective pack for loose lids and components. Share the face, edge or handle protection the order needs.
Quality and Export Support
Our project support includes agreed quality checks and export coordination. Keep the approved sample and fitted parts list with the order.
Candle Jar Lid Buying Questions
Can I order lids for jars I already have?
Yes. Send the jar model, a finished sample or a rim drawing, and the lid and finish you want reviewed.
Does a catalogue 80 mm lid fit an 80 mm opening?
Ask which feature the catalogue number describes. Compare the actual opening and lid seating dimensions and approve the pair on a sample.
How do I specify a gasket or ring?
List the part profile, material requirement and quantity with the selected lid. Confirm the parts supplied in the quote and test them together on the jar.
Can I request a lid that seals?
State the function you need and agree the verification method for the selected jar, lid and fitted part. A silicone component is one part of that assembly review.
Can I add a logo to a lid?
Send the artwork, intended size and position. Review the method and a finished sample for the chosen material.
Still Have a Product Question?
Send your requirements or a reference so our team can review your project.
Ask Our Packaging Team →Show Where Each Fit Measurement Is Taken
Show the jar opening, outer rim and area where the lid rests or engages on a drawing.
Record the Actual Seating Surface
Send the finished jar if the rim shape or contact point is hard to specify. Try the lid with its actual fitted parts on that sample.
See Candle jar lid sizes for a closer look at rim and lid-seat measurements.
Keep the Fitted Parts on the Quote
Keep the lid shell, ring, liner and any other piece identifiable. Confirm whether each part is fitted, loose or ordered as a spare.
Approve the Mark on the Lid
Approve the actual mark, top finish and visible edge with the chosen body. Check the seat again if decoration changes a contact surface.
Use a Matchable Reference for Reorders
Send the previous order number, approved lid and jar reference when requesting replacements. Record any change to finish, rim or fitted part for the new fit check.
Request a Quote
Talk to Our Packaging Team
Share the model, capacity, color, closure, decoration, packaging and estimated quantity you need. We can review the options with you.
Category: Candle Jar Lids










