
BRIGHT GLASSWARE · CHINA · SINCE 2005
Concrete Candle Holders
Compare a black geometric body with a patterned grey design for homeware ranges, gift collections and private-label candle projects. Bright Glassware can discuss the listed references, sample requirements and coordinated packaging for bulk orders.
Tell us whether you need an empty body, a support for a separate candle or insert, or a body for a candle-filling project. Include the components you want quoted so the sample review starts with the right configuration.

Compare the Two Listed Concrete Designs
BGCC007 is the grey patterned reference; its photograph shows wax, a wick and a metallic-looking rim. BGCC138 is the black faceted body shown with an open cavity. Confirm the current model, dimensions and supply scope before selecting a sample; a rim is not evidence of a removable lid.
Which Design and Supply Scope Do You Need?
Send the model, quantity, intended candle arrangement, surface direction and destination. Tell us whether the order needs an empty body, candle components or a complete pack.
Select the Body, Surface and Candle Arrangement
Define the Intended Use
For a separate candle or insert, provide its dimensions and contact points. For a filling project, identify the proposed wax-and-wick arrangement and request the body and interior specifications needed for development. Neither use is approved by the category name alone.
Explore Products →
Footprint and Tabletop Contact
Check the black geometric model on the intended surface with its proposed candle arrangement. Review base contact, any rocking and the space required around the body. Request unit weight and outside dimensions for display and freight planning.
Review Specifications →Mineral Pores and Edge Condition
Approve a reference for texture, tone and visible pores. Keep acceptable surface character separate from cracks, chipped corners and damaged rims. A close-up helps choose the inspection points; the current sample sets the acceptance reference.
Discuss Your Requirements →- Body composition and coating
- Underside finish and any pad
- Care instructions for the selected model
Formulation, Coating and Base Treatment
Ask for the selected body material and coating specification. Concrete, cement and gypsum-based composites are not interchangeable material declarations. Confirm any interior treatment, underside finish and protective pad for the actual model and intended use.
Review Selection Notes →- Pattern and marking method
- Metallic-looking finish specification
- Separate cover and component list
Pattern and Metallic-Looking Details
The grey BGCC007 reference has a patterned wall and a metallic-looking rim. Confirm how the pattern and colour are produced and whether any separate cover is included. Do not infer the metal, coating process or lid construction from the photograph.
Review Packing Options →
Confirm Filling Requirements Separately
For a proposed container candle, confirm the interior and coating and develop the complete candle with the chosen wax, fragrance and wick. A filled presentation photo is not a test record or a promise that wax filling is included in the quotation.
Discuss Your Requirements →Ready to Shortlist Your Options?
Tell us your preferred size, finish and quantity. We can help compare suitable options.
Get a Wholesale Quote →Matched Components & Presentation
List the body and every required item separately: a removable cup, candle, cover, label, insert or retail box. We can coordinate the selected packaging and accessories, with availability and fit confirmed for the chosen design.
Approve the actual assembled set and packed sample. Reference images illustrate arrangements only; components and any filling service must be expressly included in the agreed supply scope.
Discuss Custom Options →- Selected empty body or candle arrangement
- Any separate cup, candle or cover
- Label, retail box and protective insert
Custom Finishes, Branding & Coordinated Packaging
A textured body may not provide a suitable area for fine lettering. Send the artwork and proposed location, then confirm an appropriate marking method on the selected material. The label or retail box may offer a clearer branding surface.
Ask about the available finish for the named model rather than assuming every colour or marking process is offered. A new shape or a changed material formulation needs a separate feasibility, sample and commercial review. Glass decoration capabilities are not a specification for a concrete body.
Sample Review & Production Planning
Use a current sample and drawing to confirm the design, outside and usable dimensions, unit weight and component list. Record the agreed material and coating, appearance reference and intended candle arrangement before the pack is finalised.
- Model and dimensions: Current body, drawing and usable space.
- Material and finish: Body composition, coating and appearance reference.
- Base contact: Underside finish, any pad and the assembled arrangement.
- Supply and packing: Every included component and the packed sample.
Specification Review & Approval Checklist
| Specification | What to Review | Approval Reference |
|---|---|---|
| Supported candle and contact | Identify supported candle, size and actual contact points. | Approved sample and written specification. |
| Loaded stability | Check base flatness and stability with the intended candle. | Approved sample and written specification. |
| Surface and protective base | Review sealer, edges and any protective tabletop contact. | Approved sample and written specification. |
| Decoration and accessories | Approve the proposed marking method, accessory appearance and actual fit. | Approved sample and written specification. |
| Weight and fitted protection | Cushion corners and confirm manageable packed weights. | Approved sample and written specification. |
Plan Your Concrete Candle Holders Project
Show us the holder style and the candle it needs to support. Add the finish direction, quantity and whether the order includes a retail box or a complete set.
Request a Project Quote →Protective Packing & Shipping for Concrete Candle Holders
Plan protection around the selected body and its measured weight. The historical packing photographs show concrete containers and carton arrangements; they are references for discussion, not proof of a current BGCC007 or BGCC138 shipment.
Individual Product Protection
Separate bodies in supported carton cells and protect exposed corners. Confirm the cushioning and case quantity on the actual packed sample.
Surface & Component Protection
Keep finished surfaces and metallic-looking details clear of hard contact. The material image is an AI-generated packing concept; select and approve the actual contact materials separately.
Retail or Gift-Pack Fit
Corners, recessed seats and visible mineral surfaces need support without concentrated pressure. The insert should allow the holder to be removed by its body, with any separate candle or cup clearly identified.
Export Cartons & Shipment Planning
Confirm case count, packed weight and pallet requirements for the destination and route. The pallet image is an AI-generated packing concept, not a Bright Glassware delivery photograph.
Plan Your Packing & Delivery
Share your order quantity, destination and retail or export packing requirements.
Discuss Packing & Shipping →Confirm Function, Fit & Intended Use
Confirm the model-specific body material, coating and intended candle arrangement. Product names such as concrete, cement or Jesmonite do not establish the same composition or performance. No universal heat, water-resistance or finished-candle approval should be inferred from appearance.
Request care guidance for the approved finish and base treatment. If the project needs a removable insert or a filled candle, agree the relevant fit and development checks for that configuration rather than applying another model’s instructions.
Concrete Candle Holders for Different Purchasing Programs

A sculptural homeware piece
For a sculptural homeware piece, compare the body outline, finish and tabletop contact with the rest of the assortment. Confirm what candle arrangement and components the selected design will use.
A coordinated tabletop range
For a coordinated range, approve tone and texture references alongside the display footprint. Judge the actual samples together; a studio photograph cannot define acceptable batch variation.
- Number of bodies and candle components
- Any cover and accessories
- Insert layout and removal sequence
A gift-boxed holder
For a gift set, list the body, candle components and any cover or accessories. Develop the insert for those exact pieces and approve how the recipient removes them. These are purchasing scenarios, not customer case studies.
MOQ, Samples & Supply Planning
Minimum order, sample arrangements and timing depend on the design, finish, component list and pack. Request confirmation against the named model. Existing references, a changed surface and new-shape development may require different sampling and supply arrangements.
Why Source Through Bright Glassware?
An Established Packaging Business
Bright Glassware’s glass packaging business dates from 2005. For the concrete designs listed here, we support model selection, sample discussion and packaging coordination. The production and supply route is confirmed for the selected order.
Model and Sample Coordination
We support sample and specification review so the quotation identifies the selected body, finish and intended arrangement, rather than relying on a similar-looking reference.
Packaging and Accessory Coordination
Boxes, inserts, labels and suitable accessories can be coordinated with the selected design. Each supplied component and its fit remain subject to the agreed sample and quotation.
A Practical Branding Brief
We can discuss artwork, placement and the presentation pack. The marking method for a mineral surface is confirmed separately; it is not assumed from our glass finishing services.
Agreed Quality Check Points
We support quality inspection planning for the selected order. Specify appearance limits, edges, base contact and component fit against the approved sample, with any performance evidence requested separately.
Export Packing Support
We support protective packing and export projects. Provide the destination, delivery terms and retail-pack requirements so the carton and shipment brief reflects the actual order.
FAQ About Concrete Candle Holders
Are concrete holders intended for direct candle filling?
Confirm the actual model and intended configuration. A holder with a separate candle or insert and a body proposed for direct filling have different development requirements. The category name does not approve either use.
How do I choose the correct holder size?
Request a current drawing showing outside size and usable opening or cavity, plus unit weight. These values are not listed in the current records for the two models, so they should be confirmed rather than estimated from photographs.
Is the concrete colour uniform?
Review the selected finish and acceptable variation on physical samples. Use those references to describe the appearance expected for the order.
Can a holder be supplied as part of a set?
Confirm this in the quotation. The BGCC007 image shows wax and a wick, but that does not establish the standard supply scope. A metallic-looking rim also does not prove that a removable lid is supplied.
Where should the branding go?
Discuss a legible position on the actual texture, or carry the main information on the packaging if that better suits the design.
What should the packing protect?
Consider the standing base, corners, recesses and visible surfaces. Check how the support is held and removed from the proposed insert.
What do you need to review an order?
Send BGCC007 or BGCC138, quantity, intended use, proposed finish and artwork, component list and destination. Include any required dimensions, weight, coating, care or performance documentation so missing details can be resolved before quoting.
Still Have a Product Question?
Send your requirements or a reference so our team can review your project.
Ask Our Packaging Team →Define the intended candle arrangement
Before comparing quotations, decide whether you are buying an empty body, separate candle components or a developed finished candle. Keep the model, material specification, coating and included parts on the same brief.
This prevents a photograph of a filled presentation from becoming an accidental supply commitment. Samples and drawings should identify the current configuration you intend to order.
Explore related collections: Candle Packaging
Bring the tabletop into the brief
A mineral texture can be attractive while the base needs attention on a finished tabletop. The sample should establish the actual contact surface and any proposed protective treatment.
A pad should be reviewed on the finished holder, not only as a loose material swatch. Its visible edge and effect on seating can matter to the design as well as to handling.
Distinguish surface character from defects
The chosen finish needs a physical reference for tone, texture and acceptable variation. Cracks, damaged edges and poor seating should remain separate from the intended mineral appearance.
Branding also needs an appropriate panel or another location on the lid or pack. A fine logo placed over a strong texture can lose the detail the buyer expects to see.
Pack the complete holder format
The base, corners, rim and any recess or closure determine the support needed inside the box. The holder should be removable by its body rather than a decorative projection.
Any supplied candle, cup or insert belongs on the component list. A set photograph is not a substitute for specifying the actual pieces and their protective packing.
Request a Quote
Talk to Our Packaging Team
Share the model, capacity, color, closure, decoration, packaging and estimated quantity you need. We can review the options with you.
Category: Concrete Candle Holders













