Candle Packaging · Selection & Procurement

Apothecary Candle Jars Wholesale

Source apothecary candle jars with a rounded shoulder and a flat wood lid. The current glass family lists 320 ml and 450 ml nominal options for fragrance lines and gift sets.

Measure the straight glass below the shoulder for your label. Then check the opening, usable fill and fitted lid on a sample of the size you plan to order.

Explore Apothecary Candle Jars

The GJ0155-0116 apothecary glass family is listed in 320 ml and 450 ml. The photos show the glass and lid profile; request a marked sample of each size if you need to compare their proportions.

Need Help Choosing the Right Option?

Send the nominal size you want to sample and the height of your label or printed mark.

Measure the Shoulder, Label Panel and Fitted Lid

For a wholesale order, approve each jar size with its own lid, label and finished fill line.

Front view of a clear shouldered glass jar with a flat wood lid.

Read the Shoulder Profile

The neck steps inward from the straight body. Check opening access and keep the top edge of the label below the shoulder.

Review the Specification →
Measure only the straight wall

Keep the top edge of the label below the shoulder.

Set a Label Height for Each Size

Start with the straight wall on the chosen jar. On a two-size line, compare how much blank glass sits above and below the label.

Review the Specification →
Measure the jar with the lid seated

Leave enough room to lift the glass out by the body.

Allow Room to Lift the Jar Out

Use the complete jar and seated lid to measure the box. Give the buyer room to lift the vessel without pulling on the cover.

Review the Specification →
Closer front view of a clear apothecary glass jar and flat brown wood lid.

Test the Lid on the Selected Rim

Seat and remove the wood lid on the sample. If the quote includes a closure, identify it by size and finish.

Review the Specification →
Compare the glass and wood together

Approve colour and grain on the same assembled sample.

Approve Glass Colour with the Artwork

Review the filled sample under the light used for the finished range. Glass colour and wood tone can change how a small mark reads.

Review the Specification →
Mark the neck and rim on the drawing

Show where the lid seats and where the straight label panel ends.

Brief a Custom Shoulder and Rim

If the existing profile is unsuitable, mark the shoulder, opening and closure seat on a drawing. Request a feasibility review for the proposed geometry.

Review the Specification →

Color, Logo and Coordinated Presentation

Place the proof on the selected glass with the lid fitted. Agree the label position below the shoulder and use the assembled sample to approve the glass and wood tones together.

Clear apothecary glass jar with rounded shoulders and a flat brown wood lid.

Sample Review & Production Planning

Keep a labelled jar and lid sample for each size. Use those samples for artwork, fit and the final packing brief.

  • Shoulder and opening: Mark where the body begins to curve and measure the opening.
  • Lid removal clearance: Check the seated cover and room to grip and lift it.
  • Body label area: Record the straight wall height and place the artwork proof on the glass.
  • Candle development: Test the intended wax, fragrance and wick arrangement in the selected jar.
01RequirementsUse, quantity and destination
02SelectionModel and components
03Sample ReviewFit, appearance and packing
04Order SpecificationApproved configuration
05Final ReviewOrder and packing reference

Specification Review & Approval Checklist

SpecificationWhat to ReviewApproval Reference
Shoulder and openingMeasure the opening and straight area below the shoulder.Size-marked jar sample
Lid fitConfirm how the cover sits and how it comes off.Jar and paired closure
Artwork panelCompare the proof with the actual label area.Artwork placed on the jar
Usable wax fillApprove the fill line and wick on the finished trial.Fill record for the chosen size
Packed assemblyCheck clearance at the cover and protection at the base.Assembled pack

Plan Your Apothecary Candle Jars Project

Send the jar size, quantity, lid finish, artwork and delivery destination. State whether to quote the empty jars, the lids and any printed box together or separately.

Request a Project Quote →

Protective Packing for Apothecary Candle Jars

Measure the assembled height and base. Check that the pack supports the glass body without loading the wood lid.

Open carton holding clear glass cups separated by cardboard dividers

Surface and component separation

Keep each glass jar separated in its carton. Agree whether the cover is packed fitted or in its own compartment.

Open carton showing divider placement. Confirm the final pack on the selected jar.

Open beige angled gift box holding a clear ribbed glass jar beside a red jar and closed presentation boxes

Retail-box fit

The photo shows a general presentation box. Develop the insert on the selected apothecary assembly and leave room to remove the glass.

Give each size its own pack reference

Include the current jar and lid codes on the approval sheet.

Version identification

Use separate pack references if the 320 ml and 450 ml jars have different outer dimensions.

Brown cartons wrapped in clear film and yellow straps on blue plastic pallets

Delivery and Order Brief

Confirm jar and lid quantities, inner pack, outer carton and delivery destination before requesting shipping terms.

Plan Your Packing & Delivery

Share your order quantity, destination and retail or export packing requirements.

Discuss Packing & Shipping →

Check Candle Fill and Clearance Under the Lid

The catalogue volume does not establish wax weight. Set the fill line and wick on a trial candle, then verify that the fitted cover has clearance above it.

Apothecary Candle Jars for Different Purchasing Programs

Clear shouldered candle jar with a flat wood lid, seen from the front.

A Coordinated Fragrance Line

The clear body and flat lid give the range a common look. Match the label proportions on each physical jar.

Clear glass apothecary jar with its shoulder and wood lid seen from above.

Check the Shoulder and Front Panel

Use the angled view to see where the straight wall gives way to the curve. Confirm the available label height on the selected size.

Front view of the clear lidded apothecary jar and its rounded glass shoulders.

Develop the Box Around the Assembled Jar

This family image shows the lid profile. Use the actual jar and cover to measure fitted height and box clearance.

Define the Order Before Confirming Terms

ModelSelected vessel or component
SampleComplete assembly to review
ArtworkFile, colour and position
PackingRetail and outer-carton scope

Sourcing & Specification Review for Apothecary Candle Jars

01

Compare the two proportions

Review the 320ml and 450ml references side by side with the intended artwork.

02

Measure below the shoulder

Use the actual straight wall to define a label height that fits the jar.

03

Include the wood lid

Compare the fitted closure, grain direction and tone with the glass body.

04

Keep the fill line clear

Review the candle space and any clearance needed beneath the lid.

05

Pack the assembled height

Use the complete jar-and-lid envelope when developing the insert or box.

06

Record the chosen family member

Identify the exact nominal volume and appearance in sample and pricing requests.

Questions About Apothecary Candle Jars

Which apothecary jar sizes are currently referenced?

The current family lists nominal 320 ml and 450 ml glass jars with wood lids. Ask for the exact sample and drawing when comparing both sizes.

Can one label fit both family sizes?

Compare the usable wall and diameter on both samples. Shared styling does not guarantee the same label footprint.

Does the shoulder affect label placement?

It can reduce the straight area available. Check the actual panel before finalising label height.

Are the wood lids airtight?

A wood lid alone does not establish a seal. Specify any closure requirement when asking about the selected jar and lid.

Do 320ml and 450ml describe wax weights?

They are nominal container volumes in the published family. Establish the intended wax fill separately.

Still Have a Product Question?

Send your requirements or a reference so our team can review your project.

Ask Our Packaging Team →

Use the shoulder as part of the identity

An apothecary profile can remain recognisable with restrained branding. Review the label below the shoulder so the artwork and jar shape support each other.

Choose the family size with the artwork in view

Proof the artwork on both size-marked samples. Check whether the brand mark needs a different print size before assigning one label to the whole range.

Review the wood and glass together

Lid tone and grain can influence the warmth of the complete presentation. Retain the actual assembled sample rather than approving the closure as a separate photograph.

Keep the apothecary family member clear

The two nominal sizes should each have an identified jar, closure and artwork reference. A shared traditional style does not establish one label size or one insert for both assemblies.

Request a Quote

Talk to Our Packaging Team

Share the model, capacity, color, closure, decoration, packaging and estimated quantity you need. We can review the options with you.

Category: Apothecary Candle Jars