Candle Packaging · Selection & Procurement

9oz Candle Jars Wholesale

Sourcing a jar for a 9oz candle starts with one detail: does 9oz refer to vessel volume or the net weight of the finished candle? Send the fill target and any dimensions your pack has to fit.

The listed BGC054L clear votive is a nominal 10oz (300ml) comparison. If your project requires a specific 9oz specification, ask which vessel can be sampled against it.

Compare the Listed Jar Before Sourcing 9oz

The product below is BGC054L, listed at 10oz (300ml). Use it to compare the clear profile and outside footprint. For a strict 9oz target, confirm the proposed jar and working fill on a sample.

Send Your 9oz Size Requirement

Include the size basis, target fill, maximum packed dimensions and the quantity you need.

Specify the Jar, Fill and Fitted Pack

Share an approved jar, drawing or carton if you need to match a candle already in production.

Specify the size basis
  • Vessel volume
  • Finished net fill

Identify What 9oz Means

State whether you need 9 US fl oz of vessel capacity or 9 oz of finished fill by weight. If the target is a volume, specify the line at which it must be measured.

Review the Specification →
Clear BGC054L votive glass with a visible base and open rim.

Measure the Clear Reference

The BGC054L drawing gives a 78 mm top outside diameter, a 74 mm base and 98 mm height. Use these dimensions to compare the footprint and request a sample before setting tolerances.

Review the Specification →
Measure the opening
  • Inside rim
  • Lid seating depth

Check the Internal Opening

Measure inside the rim at the actual seating surface. A closure may need a separate lip, gasket or support, depending on the design you select.

Review the Specification →
Mark the working fill
  • Fill line
  • Clearance under the lid

Set Fill and Lid Clearance

Use your own formula and fill line. Check the gap above the set wax with the closure seated, especially if the lid enters the opening.

Review the Specification →
Purple, black, clear and yellow candle glasses showing script decoration.

Proof the Artwork on Clear Glass

Hold the label or print proof against a filled sample. Check edge alignment, visibility from the back and the usable height above the base.

Review the Specification →
Record the test vessel
  • Sample model
  • Formula and wick

Validate the Candle on Its Vessel

Record the jar sample and intended formulation with your wick trials. Use the selected vessel for finished-candle evaluation before releasing the artwork and pack.

Review the Specification →

Finish and Branding on the Selected Model

The photographed marble-effect pieces show finish and cover examples for BGC054L. Request the exact colour, surface and supplied components for your sample and quote.

Marble-effect glass candle jar beside a separate patterned lid.

Sample Review & Production Planning

Use the approved model and revision on the sample, drawing and order. Record which dimensions and fit checks must carry through to production.

  • Model and size basis: Record the model and whether the target is volume or net fill by weight.
  • Working fill line: Mark the agreed fill height on the sample and record the formula used.
  • Assembled dimensions: Measure the widest point and full height with the chosen lid in place.
  • Candle development: Keep the tested vessel, wax, fragrance and wick together in the approval record.
01RequirementsUse, quantity and destination
02SelectionModel and components
03Sample ReviewFit, appearance and packing
04Order SpecificationApproved configuration
05Final ReviewOrder and packing reference

Specification Review & Approval Checklist

SpecificationWhat to ReviewApproval Reference
Model and size basisIdentify the proposed jar and how the target will be measured.Sample ID and drawing revision
Working fill lineWeigh a representative pour at the selected height.Fill-height and weight record
Assembled dimensionsCheck the seated lid and finished exterior envelope.Fitted sample with agreed dimensions
Candle developmentEvaluate the finished candle on that exact jar.Your development and approval record
Packing scopeCheck the insert, lift-out room and protection on the filled assembly.Approved retail and transit pack

Request a Quote for Your 9oz Project

Send the required measurement, reference jar or sketch, finish, closure and artwork. Include quantities by version and the destination.

Request a Project Quote →

Pack the Jar and Lid as an Assembly

Set the insert after checking the jar, fitted closure and any label wrap together.

Open carton with glass vessels and corrugated cardboard dividers.

Surface and component separation

Separate hard lid surfaces from the glass rim in transit. Review the proposed divider material and the contact points on a packed sample.

Open-carton example showing divider placement.

Open green carton with an insert holding a ribbed glass jar.

Retail-box fit

Support the base and widest section while leaving enough room to lift the candle out. The photo illustrates an insert layout.

Candle glass beside a decorated label and open presentation box.

Version identification

Use the model, finish and artwork revision on the packing approval so mixed versions can be identified.

Blue folding retail carton with an open top.

Delivery and Order Brief

Ask for units per carton, external carton dimensions and packed weight for the version to be quoted.

Plan Your Packing & Delivery

Share your order quantity, destination and retail or export packing requirements.

Discuss Packing & Shipping →

Approve the Net Fill on the Sample

Tare the empty jar and weigh a representative candle at the selected fill line. Record the fill and clearance with the actual lid before setting the label weight.

Three Ways to Brief a 9oz Candle Project

Choose the route that reflects your existing jar, finished-candle target or retail-pack constraint.

Grouped marble-effect candle vessels in several finishes with patterned covers.

Explore a Decorated Finish

The photographed BGC054L marble-effect pieces can inform colour and lid discussions. Approve the exact finish and configuration on a sample.

Clear BGC054L candle glass shown open with a gently tapered profile.

Compare a Clear Votive

The clear BGC054L is the listed 10oz (300ml) reference. Check its taper and visible glass base against your design brief.

BGC054L source sheet showing 315ml, 78 mm top, 74 mm base, 98 mm height and 270 g.

Check Against an Existing Box

The BGC054L source sheet shows 315ml and its exterior measurements. The catalogue lists nominal 300ml. Use the outer dimensions to shortlist and check the box with an actual fitted sample.

Define the Order Before Confirming Terms

Price jars, finishes, closures and retail packs as separate line items where the supply scope differs. Confirm minimum quantities and timing for the selected sample and production version.

ModelSelected vessel or component
SampleComplete assembly to review
ArtworkFile, colour and position
PackingRetail and outer-carton scope

What to Send With a 9oz Sourcing Request

If you already buy this candle format, a marked sample or a drawing is usually clearer than a size name.

01

Reference Vessel

Provide the model, supplier drawing or photos with a scale.

02

Size Basis

State the required capacity measurement or finished net fill.

03

Artwork

Send the printable file and show its intended height above the base.

04

Closure

Specify the intended fit and clearance, or send a lid that must be matched.

05

Finish

Include a colour sample or an approved visual reference for review.

06

Pack Envelope

State the available height, width and insert limits if the retail pack is fixed.

Questions About 9oz Candle Jars

Is the displayed BGC054L a 9oz jar?

The listed clear BGC054L is nominal 10oz (300ml). It gives you a size and shape to compare when specifying your 9oz project.

Can I request a specific 9oz configuration?

Send the capacity basis, target dimensions, quantity and required finish. Ask what can be sampled against that specification before committing to an order.

How do I confirm a 9 oz candle fill?

Mark a fill line on the selected vessel, leave the needed clearance and weigh your intended formula at that line.

Does the listed reference include a lid?

The pictures include finish and lid examples. Confirm the actual cover, fit and supplied components in the quotation.

Where can I check the catalogue dimensions?

The BGC054L product record gives the exterior measurements. Ask for the sample opening and fitted dimensions if you are matching a lid or box.

Still Have a Product Question?

Send your requirements or a reference so our team can review your project.

Ask Our Packaging Team →

When You Need to Match an Existing Candle

Send the current jar alongside the target volume or weight. Identify any dimensions or finishes that can vary, especially if the existing lid and carton must be reused.

Agree How the Size Is Measured

For a volume target, state the measurement point. For a fill-weight target, agree the formula, working line and allowed clearance.

Review the Label on the Filled Jar

Clear glass reveals the fill line and the back of the label. Evaluate the artwork on a filled sample before approving the finished presentation.

Keep Sample and Quote Revisions Together

Use the same model, finish and closure revision on the artwork proof, packed sample and quote so purchasing and production are approving the same version.

Request a Quote

Talk to Our Packaging Team

Share the model, capacity, color, closure, decoration, packaging and estimated quantity you need. We can review the options with you.

Category: 9oz Candle Jars